城市污水处理厂混凝土结构防腐要点与设计实例
作者:
作者单位:

[上海市政工程设计研究总院(集团)有限公司, 上海市 200092]

作者简介:

曹志杰(1978—), 男, 硕士, 教授级高级工程师,从事给排水结构设计工作。

通讯作者:

中图分类号:

TU992.24

基金项目:


Anticorrosion Essentials and Design Case of Concrete Structures in Urban Wastewater Treatment Plant
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    调查表明[1],很多城市污水处理厂运行未达到设计使用寿命,水处理构筑物结构已经出现严重腐蚀现象。现从结构设计角度,简要分析污水对混凝土结构腐蚀作用的机理,提出分级防腐的设计方法,并列举一座典型城市污水处理厂的防腐设计。

    Abstract:

    Investigation shows that the operation of many urban wastewater treatment plants WWTP has not reached the design service life. Serious corrosion has occurred in the water treatment structures. The corrosion mechanism of sewage on the concrete structure is briefly analyzed. The design method of graded anticorrosion is put forward. And the anticorrosion design of a typical urban WWTP is listed.

    参考文献
    相似文献
    引证文献
引用本文

曹志杰,徐震,徐春蕾.城市污水处理厂混凝土结构防腐要点与设计实例[J].城市道桥与防洪,2022,(1):234-236.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-05-06
  • 最后修改日期:2021-05-15
  • 录用日期:2021-05-17
  • 在线发布日期: 2022-03-07
  • 出版日期:
关闭