考虑施工影响的地下连续墙环向等效支撑刚度分析
作者:
作者单位:

上海市政工程设计研究总院(集团)有限公司,上海市 200092

作者简介:

翟之阳(1983—), 男, 硕士, 高级工程师, 从事市政结构及基坑设计研究工作。

中图分类号:

TU47

基金项目:

上海建工集团股份有限公司重点科研项目(22YJKF-190)


Analysis on Circumferential Equivalent Strut Stiffness of Diaphragm Wall Considering Construction Impact
Affiliation:

Shanghai Municipal Engineering Design Institute (Group) Co., Ltd., Shanghai 200092, China

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • | | |
  • 文章评论
    摘要:

    由于环拱效应能够充分发挥混凝土抗压强度高的特点,圆形地下连续墙围护结构在超深竖井基坑中应用广泛。环向等效支撑刚度取值是圆形地下连续墙围护结构设计中的重要参数。由于地下连续墙在实际施工过程中采用折线拟合圆形,且存在地表荷载分布不均匀或土层分布不均匀等情况,这些因素会对环向等效支撑刚度产生影响。使用有限差分单元法建立计算模型,分析了基坑实际形状、不均匀荷载分布对环向等效支撑刚度的影响。计算结果表明,圆形地下连续墙的环向等效支撑刚度,在折线长度为2 m时与圆形理论解基本一致,当折线长度为3 m时,需要根据竖井直径进行折减。同时,不均匀荷载对环向等效支撑刚度造成的折减效果显著,荷载分布不均匀程度越大,竖井直径越大,环向等效支撑刚度折减越大。

    Abstract:

    The enclosure structure of circular diaphragm wall is widely used in ultra-deep shaft foundation pit because of the ring arch effect able to fully play the characteristics of high compressive strength of concrete. The value of circumferential equivalent strut stiffness is a very important parameter in the design of circular diaphragm wall enclosure structure. In practice, because the diaphragm wall adopts the polyline to fit the circle, and the surface load distribution is uneven or the soil layer distribution is uneven, these factors will affect the circumferential equivalent strut stiffness. The finite difference element method is used to establish a calculation model to analyze the effect of the actual shape of foundation pit and the uneven load distribution on the circumferential equivalent strut stiffness. The results show that the circumferential equivalent strut stiffness of the circular diaphragm wall is basically consistent with the circular theoretical solution when the polyline length is 2 m. When the polyline length is 3 m, it is necessary to reduce the polyline according to the diameter of the shaft. At the same time, the non-uniform load has a significant effect of polyline reduction caused by the circumferential equivalent strut stiffness. The greater the non-uniform load distribution is and the larger the shaft diameter is, the greater the polyline reduction of the circumferential equivalent strut stiffness is.

    参考文献
    [1]王卫东,朱伟林,陈峥,翁其平,吴江斌.上海世博500 kV地下变电站超深基坑工程的设计,研究与实践[J].岩土工程学报, 2008(S1):564-576.
    [2]宋青君, 王卫东.上海世博500kV地下变电站圆形深基坑逆作法变形与受力特性实测分析[J].建筑结构学报,2010, 31(05):181-187.
    [3]王卫东,徐中华,宗露丹,朱雁飞,翁其平.软土地区56m深圆形基坑的优化设计与实践[J].建筑结构,2022,52(10):1-10
    [4]Kumagai T, Ariizumi K, Kashiwagi A. Behaviour and analysis of a large-scale cylindrical earth retaining structure[J]. Journal of the Japanese Geotechnical Society Soils Foundation,2008,39(3):13-26.
    [5]杨骁,任凯凯,盛棋楸.刚性环梁支撑圆形基坑支护结构变形解析解[J].力学季刊,2020,41(4):684-694.
    [6]周健,罗筱波.圆形支护结构的拱效应等效支撑计算方法[J].岩土力学,2003,24(2):169-177.
    [7]金亚兵,刘动.深基坑内支撑支点水平刚度系数的解析解计算方法研究[J].岩土工程学报,2019,41(6):1031-1039.
    [8]Schwamb T, Soga K. Numerical modelling of a deep circular excavation at Abbey Mills in London[J]. Géotechnique,2015, 65(7):604-619.
    [9]JTG D63-2007,公路桥涵地基与基础设计规范[S].
    [10]沈浩,邹丽敏,王碧波.超深圆形基坑地下连续墙成槽垂直度控制施工措施[J].中国给水排水,2020,36(06):83-87.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

翟之阳,李薪丰,聂东清.考虑施工影响的地下连续墙环向等效支撑刚度分析[J].城市道桥与防洪,2025,(3):311-315.

复制
分享
文章指标
  • 点击次数:20
  • 下载次数: 12
  • HTML阅读次数: 3
  • 引用次数: 0
历史
  • 收稿日期:2024-02-28
  • 最后修改日期:2024-05-06
  • 录用日期:2024-05-20
  • 在线发布日期: 2025-03-16
关闭