Abstract:To achieve the fitting accuracy and fast convergence of multi-dimensional variable-response iterative optimization in the process of model modification, firstly, combing the stochastic response surface method (SRSM) and particle swarm optimization algorithm (PSO), the objective function concluding integrating the modal confidence degree has been established by considering the measured modal data of cable-stayed bridge structure. Secondly, based on a new cable-stayed bridge structure, the initial FE model is established. The finite element model of cable-stayed bridge has been modified based on the measured modal data of the bridge, and the feasibility of the modified method was verified. The results show that there is a certain deviation between the initial finite element model of the bridge and the service state of the actual structure, and the model should be modified. Six key parameters such as material properties of main structural components of cable-stayed bridge have been selected. After modification, the elastic modulus of the cable is increased by 29.7%, and the mass density of the main tower is increased by 24.1%. The dynamic characteristics of the modified model are fit well with the measured results, which can provide a more accurate benchmark simulation model for the further study and evaluation of the mechanical properties of cable-stayed bridge structures.