Abstract:Steel curved girders in ramps are common structures in engineering and serve as key nodes in interchange design. The adoption of steel T-frame bridges with lower structural height and no bent caps can create larger under-bridge clearance, reduce the structural height of control nodes in interchange hubs, and shorten the bridge length, thereby lowering the engineering cost. Compared with steel continuous girders, steel T-frame bridges also have advantages such as reducing negative bearing reactions under live loads and effectively preventing the overturning of curved girders. The design challenges of steel T-frame bridges lie in the design of the joint section between the steel superstructure and the concrete substructure, as well as the design of beam-column steel joints. For this purpose, the use of composite structural columns with the steel-concrete interface arranged in the middle of the columns avoids the difficulty of inspecting and maintaining steel structures in soil. And the interface is far away from the stress disturbance zone, so the sectional stress can be calculated in accordance with the plane section assumption, and zero tensile stress on the interface can be achieved by setting vertical prestress. At the same time, the rationality of the structure and the effectiveness of force transmission of beam-column steel joints are verified through the plate element analysis model.