厌氧反应器罐壁结构设计方法的对比与验证
作者:
作者单位:

上海市政工程设计研究总院(集团)有限公司,上海市 200092

作者简介:

孔祥冰(1988—), 男, 硕士, 高级工程师, 从事结构设计工作。

通讯作者:

中图分类号:

X703

基金项目:


Comparison and Verification of Design Methods for Anaerobic Reactor Tank Wall Structures
Author:
Affiliation:

Shanghai Municipal Engineering Design Institute (Group) Co., Ltd., Shanghai 200092, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对厌氧反应器结构设计尚无专用独立规范、长期参照《立式圆筒形钢制焊接油罐设计规范》(GB 50341—2014)等跨行业标准存在的适用性问题,对多尺寸厌氧反应器开展结构响应对比分析。通过建立多尺寸有限元模型,采用规范公式与数值分析方法并行计算、对比研究,定量揭示规范设计与数值模拟结果间的差异规律。据此提出兼顾安全性与经济性的两阶段设计方法:以现行规范为基准初步确定罐壁厚度,再建立精细化有限元模型,结合实际工艺荷载开展多工况受力分析与应力评定,对初始方案进行校核优化,可为同类厌氧反应器的安全经济设计提供参考。

    Abstract:

    In view of the fact that there is no dedicated independent specification for the structural design of anaerobic reactors and the applicability problem of long-term reference to cross-industry standards such as Design Specification for Vertical Cylindrical Steel Welded Oil Tanks (GB 50341-2014), a comparative analysis of the structural responses of multi-sized anaerobic reactors is carried out. Through the establishment of multi-scale finite element models, the standard formulas and numerical analysis methods are used for parallel calculation and comparative research to quantitatively reveal the difference patterns between the standard design and the numerical simulation results. A two-stage design method balancing safety and cost-effectiveness is accordingly proposed. The tank wall thickness is preliminarily determined on the basis of current specifications, and then a refined finite element model is established to conduct multi-condition stress analysis and evaluation under actual process loads so as to verify and optimize the initial design scheme, which can provide references for the safe and economical design of similar anaerobic reactors.

    参考文献
    相似文献
    引证文献
引用本文

孔祥冰,瞿芹.厌氧反应器罐壁结构设计方法的对比与验证[J].城市道桥与防洪,2026,(11):412-417.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-04-22
  • 最后修改日期:2026-06-05
  • 录用日期:2026-06-08
  • 在线发布日期: 2026-11-18
  • 出版日期:
关闭