大跨度管架桥总体设计
作者:
作者单位:

江苏省科佳设计集团股份有限公司,江苏 无锡 214002

作者简介:

周祥树(1981—), 男, 硕士, 高级工程师, 从事桥梁设计与结构分析工作。

通讯作者:

中图分类号:

U442.5

基金项目:


Overall Design of Long-span Pipe Rack Bridge
Author:
Affiliation:

Jiangsu Kejia Design Group Co., Ltd., Wuxi 214002, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    受建设场地限制,皮带机跨河桥梁通常优先采用一跨过河的简支结构形式,但简支结构跨度超过130 m较为少见,以某1-176 m下承式钢桁架皮带机管架桥为研究对象,重点阐述其总体布置、结构形式及关键构件等设计要点,结合有限元及规范进行上部主体结构强度、变形及稳定分析。最后针对桥位所处位置优势,简要介绍了架设方案。结果表明,采取合理的结构构造,适当降低恒载重量,桥梁主体结构的强度、刚度及稳定均满足要求。该桥造价经济、受力合理、施工可行,已安全运营超过5年,对类似工程具有一定参考价值。

    Abstract:

    Restricted by construction site conditions, the simple-supported structures with a single span across the river are generally preferred for belt conveyor river-crossing bridges. However, the simple-supported structures with a span exceeding 130 m are rarely seen. Taking a 1-176 m through steel truss belt conveyor pipe rack bridge as the research object, the focus is on the elaboration of the key design points including the overall layout, structural type and critical components. Combined with finite element and relevant specifications, the strength, deformation and stability of the upper main structure are analyzed. In view of the geographical advantages of the bridge location, the erection scheme of the bridge is briefly introduced. The results show that with reasonable structural details and proper reduction of dead load, the strength, stiffness and stability of the main bridge structure can fully meet the specification requirements. With reasonable force performance, economical cost and feasible construction, the bridge has been in safe operation for more than five years, which provides a reference for similar engineering projects.

    参考文献
    相似文献
    引证文献
引用本文

周祥树.大跨度管架桥总体设计[J].城市道桥与防洪,2026,(11):187-191.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-04-24
  • 最后修改日期:2026-05-26
  • 录用日期:2026-05-28
  • 在线发布日期: 2026-11-18
  • 出版日期:
关闭