基于ABAQUS的混凝土箱梁偏载效应及敏感参数分析
作者:
作者单位:

四川路桥桥梁工程有限责任公司,四川 泸州 646300

作者简介:

邹品德(1980—), 男, 学士, 高级工程师, 从事道路桥梁施工管理。

通讯作者:

中图分类号:

U448.213

基金项目:


Analysis on Eccentric Load Effect and Sensitive Parameters of Concrete Box Girders Based on ABAQUS
Author:
Affiliation:

Sichuan Road and Bridge Engineering Co., Ltd., Luzhou 646300, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为明确几何参数对箱梁纵向分布正应力的作用规律,以混凝土箱梁为研究对象,基于ABAQUS软件建立空间有限元模型,通过单次改变跨度、箱梁高度、悬臂板宽度以保证单一变量,系统分析宽跨比、高宽比、板宽比3类几何参数对箱梁纵向分布正应力的影响。结果表明,宽跨比、高宽比、板宽比越大,正应力越小;宽跨比对无偏载侧腹板与上翼板交汇处正应力影响最大;高宽比对腹板与下翼板交汇处正应力影响最显著,箱梁1/10跨、高宽比为0.423、0.563时,偏载侧腹板与下翼板交汇处正应力相对高宽比为0.282时分别降低了34.8%、52.4%;板宽比对偏载侧腹板与上翼板交汇处正应力影响较强,箱梁1/20跨、板宽比为0.5、1.0时,偏载侧腹板与上翼板交汇处正应力相对于无悬臂板时最大降低了44.36%、51.80%;研究结果可为箱梁桥的优化设计与结构安全性提升提供参考依据。

    Abstract:

    To clarify the action law of geometric parameters on the longitudinal distributed normal stress of box girders, taking the concrete box girder as the research object, a spatial finite element model is established based on the ABAQUS software. By changing the span, the height of the box girder and the width of the cantilever plate at one time to ensure a single variable, the influence of three types of geometric parameters, namely the width-span ratio, the high-width ratio and the plate-width ratio, on the longitudinal distributed normal stress of the box girder is systematically analyzed. The results show that the larger the width-span ratio, height-width ratio and plate-width ratio, the smaller the normal stress. The width-span ratio has the greatest impact on the normal stress at the intersection of the unbiased side web plate and the upper wing plate. The height-width ratio has the most significant influence on the normal stress at the intersection of the web plate and the lower wing plate. When the box girder is at 1/10 span and the height-to-width ratio is 0.423 and 0.563, the normal stress at the intersection of the eccentric load side web plate and the lower wing plate is decreased by 34.8% and 52.4% respectively compared to when the height-to-width ratio is 0.282. The plate-width ratio has a stronger influence on the normal stress at the intersection of the eccentric load side web plate and the upper wing plate. When the box girder is at 1/20 span, and the plate-width ratio is 0.5 and 1.0 respectively, the normal stress at the intersection of the eccentric load side web plate and the upper wing plate is reduced by up to 44.36% and 51.80% respectively compared with the situation without cantilever plates. The research result can provide reference basis for the optimal design and structural safety improvement of box girder bridges.

    参考文献
    相似文献
    引证文献
引用本文

邹品德,蒲玲,陈旭,徐旭.基于ABAQUS的混凝土箱梁偏载效应及敏感参数分析[J].城市道桥与防洪,2026,(11):49-53.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-05-06
  • 最后修改日期:2026-05-27
  • 录用日期:2026-05-28
  • 在线发布日期: 2026-11-18
  • 出版日期:
关闭