高速公路“白改黑”非全厚式加铺方案对比分析
作者:
作者单位:

1.招商局公路网络科技控股股份有限公司,北京市 100022
2.广西岑兴高速公路发展有限公司,广西 南宁 530021
3.招商局重庆交通科研设计院有限公司,重庆市 400067
4.招商智翔道路科技(重庆)有限公司,重庆市 400067

作者简介:

杨旭东(1973—), 男, 博士, 正高级工程师, 从事高速公路运营与养护管理工作。

通讯作者:

中图分类号:

U416.2;TU997

基金项目:


Comparative Analysis of “Cement-to-Asphalt” Non-Full-Thickness Overlay Schemes for Expressways
Author:
Affiliation:

1.China Merchants Expressway Network and Technology Holdings Co., Ltd., Beijing 100022, China
2.Guangxi Cenxing Expressway Development Co., Ltd., Nanning 530000, China
3.China Merchants Chongqing Communications Research and Design Institute Co., Ltd., Chongqing 400067, China
4.China Merchants Zhixiang Road Technology (Chongqing) Co., Ltd., Chongqing 400067, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    “白改黑”加铺沥青面层技术可充分利用旧路面剩余强度,改善行车舒适性,已成为水泥路面改造的主流方案之一。以广西某高速公路为依托工程,通过路面损坏状况指数(PCI)、行驶质量指数(RQI)、接缝传荷能力、板底脱空等现场检测与室内试验,系统分析了原水泥路面技术状况及病害特征。结果表明,行车道病害明显重于超车道,破碎板、裂缝、露骨及条状修补为主要病害类型,基层顶面当量回弹模量偏低。结合交通荷载分析,主线累计当量轴载次数已超过原设计基准期特重交通等级。在此基础上,对比了不同应力吸收层与沥青面层组合方案的技术特点、施工难度及经济性,推荐采用“2.5cm SBS改性沥青AC-10应力吸收层+4cm SBS改性沥青SMA-13”的加铺结构,为同类旧水泥路面改造工程提供技术参考。

    Abstract:

    The “cement-to-asphalt” overlay technique can fully utilize the residual strength of the existing pavement and improve the ride comfort, which has become one of the mainstream solutions for the reconstruction of cement pavements. Relying on an expressway project in Guangxi, the technical condition and defect characteristics of the original cement pavement are systematically analyzed through field inspections and laboratory tests, including the pavement condition index (PCI), riding quality index (RQI), joint load-carrying capacity, and cavity beneath the slabs. The results indicate that the defects on the carriageway are significantly more severe than on the passing lanes. The broken slabs, cracks, exposed aggregate and strip-shaped patches are the primary types of defects. Additionally, the equivalent modulus of elasticity at the base course surface is relatively low. Combined with traffic load analysis, the cumulative equivalent axle load count on the mainline has exceeded the extra-heavy traffic class specified for the original design service life. Based on this, the technical characteristics, construction difficulty and economic viability of different combinations of stress-absorbing layers and asphalt surface courses are compared. The recommended overlay structure is a “2.5 cm SBS-modified asphalt AC-10 stress-absorbing layer + 4 cm SBS-modified asphalt SMA-13,” which provides a technical reference for similar renovation projects involving old cement pavements.

    参考文献
    相似文献
    引证文献
引用本文

杨旭东,陈全,张德伟,彭良臣,冼旭东,王昌华.高速公路“白改黑”非全厚式加铺方案对比分析[J].城市道桥与防洪,2026,(11):157-161.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-05-18
  • 最后修改日期:2026-05-28
  • 录用日期:2026-05-29
  • 在线发布日期: 2026-11-18
  • 出版日期:
关闭