Abstract:To address the problems of frequent salt erosion distresses and durability degradation of asphalt pavements under the high-temperature, high-humidity and high-salt-spray environment along the Guangdong coast, field distress investigations and chloride ion layered detection are carried out on typical expressway sections, and the indoor dry-wet cycle accelerated erosion tests are designed to evaluate Marshall stability, splitting tensile strength and freeze-thaw splitting strength ratio of asphalt mixture. The salt erosion resistance and cost-effectiveness of four maintenance techniques such as ordinary asphalt, SBS modified asphalt hot recycling, waterproof and anti-seepage seal coat, and hot-recycled SMA dense structure are compared. The results show that chloride ions accumulate most heavily in the 0~1 cm surface layer of pavement, and salt erosion damage on seaside sections is significantly higher than that on inland sections. After 30 dry-wet cycles, the freeze-thaw splitting strength ratio decreases by more than 40%. Among the four techniques, the hot-recycled SMA dense structure exhibits the best salt erosion resistance (durability of 12~15 years), while SBS modified asphalt hot recycling offers outstanding cost-effectiveness. Based on these findings, a differentiated whole-life-cycle salt erosion prevention and green maintenance system is developed, providing a reference for durability improvement and low-carbon maintenance of coastal expressways in South China.