黏层油类型及洒布量对聚丙烯抗裂基布夹层沥青面层—水稳基层间黏结性能的影响
作者:
作者单位:

1.江西省交通投资集团项目建设管理公司,江西 南昌 330025
2.江西省交通投资集团有限责任公司,江西 南昌 330025
3.华东交通大学 土木建筑学院,江西 南昌, 330013
4.公路桥梁与隧道结构江西省重点实验室,江西 南昌 330025

作者简介:

周浩宇(1990—), 男, 硕士, 高级工程师, 从事高速公路建设工作。

通讯作者:

中图分类号:

U416

基金项目:

江西省交通运输厅科技项目(2025ZG029)


Effects of Tack Coat Type and Application Amount on Bonding Performance between Polypropylene Crack-resistant Base Fabric Interlayer Asphalt Surface Layer and Water-stabilized Base Layer
Author:
Affiliation:

1.Project Construction Management Company, Jiangxi Provincial Communications Investment Group, Nanchang 330025, China
2.Jiangxi Provincial Communications Investment Group Co., Ltd., Nanchang 330025, China
3.School of Civil Engineering and Architecture, East China Jiaotong University, Nanchang 330013, China
4.Jiangxi Provincial Key Laboratory of Highway Bridge and Tunnel Structures, Nanchang 330025, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为评价聚丙烯抗裂基布夹层沥青路面结构的层间黏结性能,以水泥稳定碎石基层、聚丙烯抗裂基布和AC-20C沥青混合料组成的复合结构为研究对象,开展45°斜剪试验和拉拔试验,分析普通乳化沥青、70号基质沥青和SBS改性沥青3类黏层油对层间黏结性能的影响,并揭示沥青洒布量对抗剪性能的影响。结果表明,在相同目标的洒布量条件下,SBS改性沥青的剪切强度和拉拔强度均最高,70号基质沥青次之,普通乳化沥青最低;拉拔试验所得黏层油的优劣排序与45°斜剪试验一致;当70号基质沥青的洒布量由1.00 kg/m2增至1.20 kg/m2时,剪切强度得到明显提高,但当洒布量持续增至1.40 kg/m2后,剪切强度呈下降趋势,表明热沥青类黏层油的洒布量存在适宜范围。

    Abstract:

    To evaluate the interlayer bonding performance of asphalt pavement structures incorporating a polypropylene anti-cracking base fabric interlayer, taking a composite structure consisting of a cement-stabilized crushed stone base, polypropylene anti-cracking base fabric and AC-20C asphalt mixture as the research object, the 45° oblique shear test and pull-off test are conducted to analyze the effects of three types of tack coat materials such as ordinary emulsified asphalt, 70# base asphalt and SBS-modified asphalt on interlayer bonding performance, and to reveal the influence of asphalt application amount on shear resistance. The results show that under the same targeted application amount, SBS-modified asphalt exhibits the highest shear strength and pull-off strength, followed by 70# base asphalt, while ordinary emulsified asphalt shows the lowest values. The ranking of tack coat materials obtained from the pull-off test is consistent with that from the 45° oblique shear test. When the application amount of 70# base asphalt increases from 1.00 kg/m2 to 1.20 kg/m2, the shear strength increases significantly. However, when it further increases to 1.40 kg/m2, the shear strength decreases, indicating that there is an appropriate application amount for hot asphalt tack coat materials.

    参考文献
    相似文献
    引证文献
引用本文

周浩宇,叶华,魏智超,张源斌,徐伊健,张恺.黏层油类型及洒布量对聚丙烯抗裂基布夹层沥青面层—水稳基层间黏结性能的影响[J].城市道桥与防洪,2026,(11):7-12.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-06-09
  • 最后修改日期:2026-09-24
  • 录用日期:2026-06-15
  • 在线发布日期: 2026-11-18
  • 出版日期:
关闭