Abstract:To improve the high-temperature resistance to permanent deformation of asphalt mixtures in heavy-load traffic sections, taking the AC-20 mixture as the object, the dosage of polyolefin high modulus agents ranging from 0 to 0.9% is set, and the volume index, 55 ℃ multi-frequency dynamic modulus and 60 ℃ rutting tests are carried out. Results show that the high modulus agents can significantly enhance the high-temperature stiffness and rutting resistance of mixtures, and the improvement is more obvious in low-frequency, slow-speed and heavy-load working conditions. When the dosage is 0.7%, E*55,10 reaches 6 250 MPa, which is 82.2% higher than that of the benchmark group. K55 increases to 0.093. The dynamic stability reaches 11 320 times per mm, an increase of 106.6%, and the rutting depth is reduced by 46.9%. E*55,10 has a relatively high correlation with dynamic stability, with R2 reaching 0.999. After the dosage is increased to 0.9%, the performance slightly declines. It is comprehensively determined that the appropriate dosage is 0.7%.